How to Change a Car Tire – Step by Step Guide

Changing a car tire is something every driver should know how to do. Whether you have a flat tire or you just need to switch to winter tires, being able to change your car tire yourself is a valuable skill. In this article, we will explain how to change a car tire step by step.

Step 1: Preparing the Car

Before you begin, you will need to prepare your car. Park the car on a flat surface and turn off the engine. Make sure you engage the parking brake. If you’re on a slope, use wheel chocks to make sure your car won’t roll.

Step 2: Loosening the Lugs

The next step is to loosen the lugs. You will need a lug wrench for this. Place the wrench on the lug nut and turn it counter-clockwise to loosen it. Repeat this for all the lug nuts.

Step 3: Removing the Wheel

Once all the lug nuts have been loosened, you can remove the wheel. Place your hands on the wheel and pull it off the car.

Step 4: Installing the New Tire

Now that the wheel has been removed, you can install the new tire. Place the new tire on the wheel and line up the holes. Then, thread the lug nuts onto the wheel and tighten them.

Step 5: Lowering the Car

Once the wheel is secured, you can lower the car back down. Turn the jack handle counter-clockwise to lower the car back to the ground.

Step 6: Tightening the Lugs

The final step is to tighten the lugs. Use your lug wrench to tighten the lug nuts. Make sure to tighten them evenly and securely.

Now that you’ve followed the steps above, you know how to change a car tire. By following these steps, you can easily switch to winter tires or replace a flat tire. Changing a car tire is an essential skill for any driver, so make sure to practice it so that you’re prepared in case of an emergency.